Optimize Clock Speeds • Analyze Thermals • Calculate Performance & Power

CPU Configuration

Picking a CPU loads its stock multiplier, cores and power limit — you can still adjust everything.
Temperatures assume a 25°C ambient — fine-tune ambient and airflow in the Thermal tab.
If the workload demands more than this limit, the all-core clock is throttled to fit.

Effective Clock Speed

5.2 GHz

Boost: 5.4 GHz | All-Core: 5.2 GHz

Peak Single
5.4 GHz
Power Draw
114W
Temperature
50°C
Efficiency vs Stock
100%

Per-Core Clock Speeds Under Load

Thermal Headroom

Throttling Safe Optimal

50% - Safe Operating Temperature

Saved Profiles

No profiles saved yet — configure your CPU and press "Save Clock Profile". Profiles stay on this device.

Thermal Analysis

More aggressive fan curves lower temperatures at the cost of noise.
65°C
Peak Temp
40°C
Delta T
35°C
To TjMax
42%
Fan Speed

Temperature Over a Stress Run (TjMax = 100°C)

Sustained Performance vs CPU Temperature

Thermal Optimization

Voltage Configuration

Higher LLC reduces vdroop under load but risks voltage overshoot on load release.

Power Consumption (full load)

231W

VRM Efficiency: 90% | Cost/Year: $44

Voltage Stability Zones

Voltage-Frequency Curve (your operating point marked)

VRM Efficiency
90%
Power Phases
12+2 Active
Vdroop
36mV
Annual cost assumes 4 h/day at 60% of full-load power plus idle the rest of the day, at $0.12/kWh. C-States and Speed Shift cut idle power.

Overclocking Potential

Faster memory adds performance but stresses the memory controller, lowering stability confidence.

Maximum Stable OC

5.5 GHz

Confidence: 77% | Voltage Required: 1.21V

Stability Confidence

Ready to Test

OC Scaling: Performance Gain vs Power Cost (target marked)

Overclock Risk Assessment

Performance Benchmarks

Performance Score

29,985

Single-Core: 2,101 | Multi-Core: 29,985

Gaming Performance (FPS)

CS2
490
Warzone 2
159
Cyberpunk
92
F1 2023
208

Performance vs Competition (single-core left axis, multi-core right axis)

Benchmark History

No runs recorded yet — press "Run Full Benchmark" to snapshot the current configuration. History stays on this device.