Materials:Gypsum Plaster

From Fab @ Home

Contents 1 Material Data For REPLACE WITH MATERIAL NAME 2 Description 3 Recipe and/or Vendors 3.1 Recipe 3.2 Vendors 4 Tool Parameter Files 4.1 Files 5 Techniques and Examples 5.1 Images 5.2 Techniques and Notes 6 Properties 6.1 Links to Properties 6.2 Physical Properties 6.3 Mechanical Properties 6.4 Electrical Properties 6.5 Thermal Properties 6.6 Chemical Properties 7 Safety Information 7.1 MSDS Files 7.2 MSDS Links

Material Data For REPLACE WITH MATERIAL NAME

Member of Material Category: REPLACE WITH CATEGORY NAME

Description

'''REPLACE WITH MATERIAL NAME''' Container.jpg Image of REPLACE WITH MATERIAL NAME in container as purchased or prepared

'''REPLACE WITH MATERIAL NAME''' Extruded.jpg Image of REPLACE WITH MATERIAL NAME as extruded from syringe

Please give a verbal description of REPLACE WITH MATERIAL NAME in detail here.

Recipe and/or Vendors

Recipe

If the material is made from ingredients, please provide a description of ingredient quantities, method of preparation, total resulting quantity of prepared material.

To prepare XXX g or YYY mL of REPLACE WITH MATERIAL NAME:

1. Ingredient 1, mass or volume
2. Ingredient 2, mass or volume

Vendors

1. Name and nationality of vendor 1 or ingredient 1, Cost, Quantity
2. Name and nationality of vendor 2 or ingredient 2, Cost, Quantity

Tool Parameter Files

• To make use of these tool configuration files, save them in the "Tools" folder of your Fab@Home Application Folder, and restart the application, or reload the tool files using the application menu command.
• Please name the tools files as:

"MaterialName_TipInternalDiameterInMicrometers_NeedleOrTaper.tool" - see examples below

• Please include your name and a revision date as comments in the tool file so that others can consult with you
• If your file is for a 2-syringe tool machine, please include the prefix Right_ or Left_ to the file name.
• To upload files, please compress them first - the wiki will not allow .tool file extensions.

Files

• [[Media:REPLACE WITH MATERIAL NAME_1000_Taper.zip|Parameters for 1000um id taper tip]],17:40, 22 September 2007 (EDT)
• [[Media:REPLACE WITH MATERIAL NAME_850_Needle.zip|Parameters for 850um id needle]],17:40, 22 September 2007 (EDT)

Techniques and Examples

Please upload pictures of successful use of this material, e.g. a part or support structure made with the material.

Images

'''REPLACE WITH MATERIAL NAME''' Example1.jpg Description of example 1

'''REPLACE WITH MATERIAL NAME''' Example2.jpg Description of example 2

Techniques and Notes

Please list any use techniques that you have developed for this material here, including post-processing, compatibility issues, etc.

Properties

Please list known physical, mechanical, electrical, thermal, and chemical properties of REPLACE WITH MATERIAL NAME here or link to an electronic source of information.

Links to Properties

• Matweb Materials Database
• Vendor or Manufacturer Properties Data

Physical Properties

Mechanical Properties

Electrical Properties

Thermal Properties

Chemical Properties

Safety Information

Please upload or link to a Materials Safety Data Sheet (MSDS) here, or provide any information that you can on storage and use hazards, safe handling procedures, safety equipment, etc.

MSDS Files

• [[Media:REPLACE WITH CATEGORY NAME_REPLACE WITH MATERIAL NAME_MSDS.pdf|Please upload a PDF of the MSDS here]]

MSDS Links

• ChemFinder Online Chemical Information Database
• MSDS Solutions.com, Free Online MSDS Database
• listing of online MSDS information, from Cornell University EHS Department